Differences

This shows you the differences between two versions of the page.

--- understanding_the_gcode_z_offset [2026/08/24 13:46] – dshoop
+++ understanding_the_gcode_z_offset [2026/08/24 14:08] (current) – dshoop
@@ Line 52: / Line 52: @@
 === Why not by Screen ===
-Workflows using the [[Screen]] can be problematic as proper attention needs to be considered for how this value may be being changed by other controls. It is not displayed live and the value shown can be stale. This can result in issues when it send incremental value changes. Saving it in the Screen's workflows can also trigger changes to other values unintentionally. It's better and easier to change the value in the console or in the [[Fluidd]] GUI.
+Workflows using the [[Screen]] can be problematic as proper attention needs to be considered for how this value may be being changed by other controls. It is not displayed live and the value shown is often stale. This can result in issues when it send incremental value changes. The Screen does not send absolute adjustment values to Klipper, it send relative value changes. This means the Screen's understanding of the gcode z offset can differ from what it actually is, so if it still believes the offset is, say, 0.125, and it was really 0.200, when you adjust the offset on the screen by 0.100 that issues a ''SET_GCODE_OFFSET Z_ADJUST=0.100'' command and the offset becomes 0.300mm and not 0.225mm.  Saving it in the Screen's workflows can also trigger changes to other values unintentionally. It's better and easier to change the value in the console or in the [[Fluidd]] GUI.
 === Slicer settings===
+== As a filament setting (change filament gcode)==
-== Printer settings ==
+You can save the gcode z offset for a specific filament and have that then set the gcode z offset value from the slicer as part of the filament settings:
-You can set the gcode z offset as part of the printer configuration.
+{{ :orca_slicer_filament_z-offset_setting.jpg?400 }}
-{{ :orca_slicer_z-offset_settings.jpg?400 }}
+This can be useful if you want to store your gcode value as part of your filament setting rather than manually keeping track of it and adjusting it manually before you start to print. This way the value is also stored as part of the filament profile and changes when you change loaded filament profiles.
-== As a filament setting (change filament gcode)==
+== Printer settings ==
-{{ :orca_slicer_filament_z-offset_setting.jpg?400 }}
+The gcode z offset can be set by the slicer as a printer adjustment, yet **this method is not recommended** as the slicer then recalculates and applies the offset value to all movement directives it produces in the gcode file. This is more designed to provide an error adjustment to the nozzle height to account for the probe incorrectly positioning the nozzle. Since we can calibrate the probe this is unnecessary and is mentioned here just so we understand this isn't a good method should you stumble on the setting.
+You can set the gcode z offset as part of the printer configuration like so:
+{{ :orca_slicer_z-offset_settings.jpg?400 }}
 ===== Determining and calibrating the gcode z offset =====