Differences

This shows you the differences between two versions of the page.

--- resources [2026/01/26 11:58] – dshoop
+++ resources [2026/07/10 20:56] (current) – dshoop
@@ Line 35: / Line 35: @@
 https://www.simplify3d.com/resources/print-quality-troubleshooting/
 Consult and try its recommendations before asking questions about print quality issues you may experiencing.
+Creality has a [[https://www.creality.com/blog/most-common-3d-printing-problems|"The 10 Most Common 3D Printing Problems and How to Fix Them"]] page.
 ===== Klipper =====
@@ Line 72: / Line 74: @@
   * [[https://www.youtube.com/watch?v=mCcP8dffwLk|How to Tune The Elegoo Neptune 4 Klipper 3D Printer for Better Print Quality (Step-by-Step Guide)]]\\
-    * Good coverage for tuning Extruder Rotational Distance and aligning the gantry.
+  * Good coverage for tuning Extruder Rotational Distance and aligning the gantry.
   * [[https://m.youtube.com/watch?v=p2VJgK5IbT0|ULTIMATE 3D PRINTER TUNING GUIDE for the ELEGOO Neptune 4 plus / pro / max]]
 ===== General printer tuning =====
@@ Line 83: / Line 85: @@
 https://wiki.bambulab.com/en/knowledge-sharing/troubleshooting-printing-issues
 https://wiki.bambulab.com/en/filament-acc/filament/slice-param
+==== Calibration Models ====
+See Orca for built in calibration models for:
+  * max volumetric flow rate
+  * extruder temperature
+  * pressure advance (use chevron model)
+A faster, less subjective flow ratio test that's more functionality focused and uses way less filament can be found at https://www.printables.com/model/1113488-flexi-flow-calibration-tool-v4-by-ck3d
+[[https://www.printables.com/model/1324902-grabby-the-claw-a-quick-calibration-test-for-3d-pr|Grabby the Claw - a quick calibration test for 3D printed action figures!]] ("not a comprehensive guide to tuning your printer in general." Also its troubleshooting tips are geared toward non-klipper parlance, so apply some translation to get the gist, it's just mostly a good model, yet not for PLA.)