Differences

This shows you the differences between two versions of the page.

--- probe_calibration [2026/08/24 13:42] – dshoop
+++ probe_calibration [2026/08/24 13:43] (current) – dshoop
@@ Line 7: / Line 7: @@
 Calibrating the z probe is NOT the same as [[how_should_i_set_the_z_offset_to_adjust_nozzle_height|setting the gcode z offset]].
-Also the "probe z offset" set as part of probe calibration is not the "gcode z offset" used to fine adjust the nozzle height for printing. The z offset referred to in probe calibration is the "z probe z offset" or the offset distance between the probe and the nozzle in the z plane. There is also an x and y probe offset.
+Also the "probe z offset" set as part of probe calibration is not the [[understanding_the_gcode_z_offset|"gcode z offset" used to fine adjust the nozzle height for printing]]. The z offset referred to in probe calibration is the "z probe z offset" or the offset distance between the probe and the nozzle in the z plane. There is also an x and y probe offset.